| Author |
Message |
Guest
|
 Posted:
Wed Jan 19, 2005 8:19 am Post subject:
Need Help on Windows Router!!!!! |
|
|
I have the following three computers plugged on the same hub
ComputerA Windows 2000 Professional
172.16.1.2
ComputerB Windows 2000 Server
172.16.1.1 Realtek Inteface
10.1.1.1 Winbond Interface
ComputerC Windows 2000 professional
10.1.1.2
I have enabled IP Forwarding on ComputerB
and I have set the following Static Route on ComputerB
Destination Network Mask Gateway Interface
172.16.0.0 255.255.0.0 172.16.1.1 Realtek Connection
10.0.0.0 255.0.0.0 10.1.1.1 Winbond Connection
When I tried to ping from 172.16.1.2 to 10.1.1.2, it said Destination
Unreachable
ANY Suggestions Are Greatly Appreciated. |
|
| Back to top |
|
 |
Michael J. Pelletier
Guest
|
| Posted:
Wed Jan 19, 2005 8:19 am Post subject:
Re: Need Help on Windows Router!!!!! |
|
|
tsaolimkei@gmail.com wrote:
| Quote: | I have the following three computers plugged on the same hub
ComputerA Windows 2000 Professional
172.16.1.2
ComputerB Windows 2000 Server
172.16.1.1 Realtek Inteface
10.1.1.1 Winbond Interface
ComputerC Windows 2000 professional
10.1.1.2
I have enabled IP Forwarding on ComputerB
and I have set the following Static Route on ComputerB
Destination Network Mask Gateway Interface
172.16.0.0 255.255.0.0 172.16.1.1 Realtek Connection
10.0.0.0 255.0.0.0 10.1.1.1 Winbond Connection
When I tried to ping from 172.16.1.2 to 10.1.1.2, it said Destination
Unreachable
ANY Suggestions Are Greatly Appreciated.
|
What is the default route on ComputerA? It should have a default route of
ComputerB....Same as ComputerC...
-- Michael |
|
| Back to top |
|
|
Mike
Guest
|
| Posted:
Wed Jan 19, 2005 5:47 pm Post subject:
Re: Need Help on Windows Router!!!!! |
|
|
tsaolimkei@gmail.com wrote:
| Quote: | I have the following three computers plugged on the same hub
ComputerA Windows 2000 Professional
172.16.1.2
ComputerB Windows 2000 Server
172.16.1.1 Realtek Inteface
10.1.1.1 Winbond Interface
ComputerC Windows 2000 professional
10.1.1.2
I have enabled IP Forwarding on ComputerB
and I have set the following Static Route on ComputerB
Destination Network Mask Gateway Interface
172.16.0.0 255.255.0.0 172.16.1.1 Realtek Connection
10.0.0.0 255.0.0.0 10.1.1.1 Winbond Connection
When I tried to ping from 172.16.1.2 to 10.1.1.2, it said Destination
Unreachable
ANY Suggestions Are Greatly Appreciated.
|
Err, what excatly are you trying to achieve with that setup? I mean, if
they are all plugged into the same hub, what is the point of 2 nics in
the server??
--
------------------------------------
Real email to mike. The header email is a spam trap and you will be
blacklisted,
submitted to anti-spam sites and proably burn in hell. |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in