RTT
Guest
|
 Posted:
Wed Nov 16, 2005 9:20 am Post subject:
ISDN between cisco 760 and 770 |
|
|
i have 2 cisco routers. Once cisco 770 and one cisco 760. I want to use
a ISDN connection between the two. but with my current confirguration
only the cisco 760 can open the connection. When the cisco 770 tries to
open te connection he says no password found.
current config of the cisco 770 (t770):
set system t770
set multidest on
set ppp auth in chap
set ppp secret host
cd lan
set ip address 172.24.28.245
set ip netmask 255.255.252.0
set ip routing on
set ip rip update periodic
set user r760
set ppp auth out chap
set ppp secret client
set bridging off
set ip address 10.10.10.1
set ip netmask 255.255.255.0
set ip routing on
set ip rip update demand
set ip route destination 0.0.0.0 gateway 10.10.10.2
set ip rip version 1
set 1 number 051555555
set timeout 360
set active
reboot
current config cisco 760 (r760):
set system r760
set multidestination on
cd LAN
set ip address 192.168.1.1
set ip netmask 255.255.255.0
set ip routing on
set ip rip update periodic
set user t770
set ppp password client
set ppp secret client
set ip address 10.10.10.2
set ip netmask 255.255.255.0 set ip routing on
set ip rip update demand
set ip route destination 0.0.0.0/0 gateway 10.10.10.1
set number 051444444
set timeout 360
set active
reboot
everywhere i set a password i use the same password.
i also compared the two config and made one with all the command in the
2 above config both that wasn't any help
with the above config r760 can open connection to t770, but t770 can
not open the connection to r760 if it's not already active. always
receive the error 'no password found' and then he disconnects.
does anyone know why that happens?
kindest regards,
Tom |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in