Ramon F Herrera
Guest
|
 Posted:
Wed Nov 09, 2005 5:25 am Post subject:
Please help me diagnose/fix this echo |
|
|
Just when I was ready to work on the deployment of several hundred
Asterisk SIP phones, I bumped into a serious potential show stopper: an
echo.
I went to Astricon and attended the Echo Session. I also happen to know
some (not a lot) about impedance matching, etc.
My problem is mainly related to the DTMF digits when my users call an
IVR system, from a SIP phone to a PSTN IVR.
Would some of you folks out there (preferably knowledgeable) please
dial into the Boston Verizon voice mail number from your SIP phone:
1-617-491-0012
and then leave a message, for instance, in my voice mail:
617-576-2545
(you don't have to leave anything) In fact, you will probably not be
able to leave any message because the DTMF digits will not be
recognized.
These are my settings:
Asterisk 1.2.0-beta2
Sipura 2100
Cisco AS-5300
A colleague called from his Linksys digital hardphone and was able to
leave me a message (i.e. the DTMF digits were recognized by Verizon),
but then when he tried from a Sipura ATA he failed.
It looks like it is worth purchasing the whole telephone (as opposed to
a ATA+phone combination) if you want to prevent echo.
I tried changing the "FXS Port Input Gain" and "FXS Port Output Gain"
from the -3 default to -2 and -1, but no luck.
TIA,
-Ramon F Herrera |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in