EggNChips
Guest
|
 Posted:
Thu Oct 14, 2004 6:05 pm Post subject:
setting up asterisk |
|
|
Guys,
Just started tinkering with asterisk and so far I am utterly amazed at the
power and flexibility of Asterisk. I have a machine running XLite and a
Zyxel Prestige 200W and the both log into the Asterisk ok.
Now the problem, when I dial the xlite extension from the Prestige, it rings
and I get a ringing tone on the Zyxel speaker, but if I try to answer the
call, but the Prestige just keeps trying the number.
Below is a dump of the log on the Asterisk server.
Connected to Asterisk 1.0.0 currently running on linux (pid = 3850)
Verbosity is atleast 41
-- Remote UNIX connection
-- Registered SIP '2001' at 192.168.0.218 port 5060 expires 1800
-- Saved useragent "X-Lite build 1095" for peer 2001
-- Executing Dial("SIP/2000-1a06", "SIP/2001|20") in new stack
-- Called 2001
-- SIP/2001-205a is ringing
Oct 14 13:26:39 WARNING[6150]: chan_sip.c:681 retrans_pkt: Maximum retries
excee
ded on call 43458-D1B9-11C3-5BED-DD74319D5BB9@192.168.0.178 for seqno 1
(Non-cri
tical Response)
-- SIP/2001-205a answered SIP/2000-1a06
-- Attempting native bridge of SIP/2000-1a06 and SIP/2001-205a
== Spawn extension (from-sip, 2001, 1) exited non-zero on 'SIP/2000-1a06'
Oct 14 13:26:50 WARNING[6150]: chan_sip.c:681 retrans_pkt: Maximum retries
excee
ded on call 43458-D1B9-11C3-5BED-DD74319D5BB9@192.168.0.178 for seqno 2
(Non-cri
tical Response) |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in