Router connects to net, but can't access it
DComTalk.com Forum Index DComTalk.com
Discussion of VoIP, VPN, Video Conferencen, DSL and other data commucations.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web dcomtalk.com
Router connects to net, but can't access it

 
Post new topic   Reply to topic    DComTalk.com Forum Index -> DSL
Author Message
MichaelG
Guest
Posted: Sat Dec 11, 2004 3:42 pm    Post subject: Router connects to net, but can't access it Reply with quote
I have a D-Link DSL-504G ADSL router and I can connect to the Internet
using a bridged connection and EnterNet 300 with no problem. I am
configuring the router using a web browser and wish to connect using
PPPoE. The router can establish an internet connection using this
method (I can confirm this with the routers config options). but I
cannot access the Internet with any applications. I have tried
numerous combinations of settings, enabled DHCP but get nothing. Do I
need to use some sort of program to access the Internet connection the
router has established?
Any help would be greatly appreciated.
Back to top
Guest
Posted: Sat Dec 11, 2004 5:27 pm    Post subject: Re: Router connects to net, but can't access it Reply with quote
MichaelG wrote:
Quote:

I have a D-Link DSL-504G ADSL router and I can connect to the Internet
using a bridged connection and EnterNet 300 with no problem. I am
configuring the router using a web browser and wish to connect using
PPPoE. The router can establish an internet connection using this
method (I can confirm this with the routers config options). but I
cannot access the Internet with any applications. I have tried
numerous combinations of settings, enabled DHCP but get nothing. Do I
need to use some sort of program to access the Internet connection the
router has established?
Any help would be greatly appreciated.

Tried talking to your ISP's support folks?

LB
Back to top
David Efflandt
Guest
Posted: Sat Dec 11, 2004 7:24 pm    Post subject: Re: Router connects to net, but can't access it Reply with quote
On Sat, 11 Dec 2004 18:42:49 +0800, MichaelG <blph60@excite.com> wrote:
Quote:
I have a D-Link DSL-504G ADSL router and I can connect to the Internet
using a bridged connection and EnterNet 300 with no problem. I am
configuring the router using a web browser and wish to connect using
PPPoE. The router can establish an internet connection using this
method (I can confirm this with the routers config options). but I
cannot access the Internet with any applications. I have tried
numerous combinations of settings, enabled DHCP but get nothing. Do I
need to use some sort of program to access the Internet connection the
router has established?
Any help would be greatly appreciated.

What is LAN nic IP of 504G? What is OS of your PC? What shows for nic
IP, gateway, and DNS of your PC? And make sure that Enternet300 or any
other PPPoE is NOT trying to run from your PC, because that will not work
behind a router.

Although, I assume that if you are able to configure your router, and it
shows PPPoE connected, it might either be a gateway problem on your PC,
DNS problem, access limits set on your router (MAC address, etc.?), or
firewall settings on your PC.
Back to top
 
Post new topic   Reply to topic    DComTalk.com Forum Index -> DSL All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




VoIP Solutions: Telephone Systems Electronics Satellite TV Tech & Gadgets
Powered by phpBB