Guest
|
 Posted:
Tue Jan 25, 2005 4:03 pm Post subject:
fwd (process) not running - clusterXL |
|
|
I'm running a failover solution - ClusterXL running in HA - new mode.
On the secondary module - the MGMT Station is seeng the device as down
because the fwd deamon is down. On Smartview status - 0n the secondary
module - the 'Firewall-1' is up but the 'ClusterXL' and the 'SVN
foundation' are down - reason: fwd is stopped. (When doing a ps -aux
there is no fwd)
When I do an fwstart on the secondary box I get:
---------------------
sic name for 1.1.1.1 is null
Local Policy is Up-To-Date.
The Policy was not installed because it is the same as the Policy
already on the Module.
FireWall-1 started
----------------------------
1.1.1.1 is the sync interface of the primary FW.
Sic is working fine from the MGMT station to the FW modules as the
rulbase installs just fine.
Would there be a SIC problem between the 2 firewall modules?
cphastop/start doesn't resolve the problem.
I'm still getting:
-----------------
cphaprob state
Cluster Mode: New High Availability (Active Up)
Number Unique Address Assigned Load State
1 1.1.1.1 100% active
2 (local) 1.1.1.2 0% down
----------------------- |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in