Ben Weston
Guest
|
 Posted:
Thu Oct 07, 2004 10:47 pm Post subject:
Flowpoint 2200 firmware problems |
|
|
I've been trying to load a firmware update into my Flowpoint 2200. I'm
trying to go from 2200-18 to 2200-16 (so that I can connect to our
CopperMountain DSLAM).
I had at least a partially corrupted file system, as I was unable to
write to the FLASH. After following the "If you can't write and have
corruption do this" set of instructions, I got the file loaded.
However, it keeps tossing up the following error.
********** Hardware error: SDSL I/F not properly installed! **********
I loaded the corresponding asic.aic file for the new firmware. It's
still not working. The DSLAM's port flashed for about a minute, then
continues on it's port scanning.
Flowpoint info as follows:
Model: 2210
Part: 905-00433-04
New firmware: 22001602.350
New asic: lcv4sdslnf.aic
As best I've been able to determain, it's the right version. Our Sr.
Engineer concurs, so we're sorta stumped here at the moment. Anyone
able to shed some light on the situation?
Ben
--
Ben Weston
Network Technician
Arcus Digital / AcadiaNet
(207) 861-7067 |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in