Cisco Fan
Guest
|
 Posted:
Tue Jan 18, 2005 3:23 pm Post subject:
Lucent Brick FW problem ... |
|
|
Hi,
we just picked up a Lucent Brick 80 to do some MPLS termination/NAT for
customer connections ... anyway, we're more or less at a loss trying to
configure it ... just about anything we tried (using more than basic
technology knowledge of both software-firewalls and Cisco PIX) we ended
up not being able to get any data transfered from the inside to the
outside (didn't even try anything beyond that). The manuals of LSMS 7.x
aren't really helpful, either ... nor was Google trying to find any
how-tos or stuff on the Internet ...
Does anybody here have experience with the Lucent Brick firewalls?
Or, alternatively: What firewalls are people using to connect multiple
MPLS networks to the internet? Pix would work, and I would love to stick
with it, if it weren't for
a) no overlapping IP ranges on different VLANs
b) limit of 12 interfaces (incl. VLANs) on a 520 (10 on a 515)
Thanks in advance,
-gg |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in