DComTalk.com

Call me stupid, but I cannot figure out how to get this removed from my
config:

clear trunk 1/1 1-4094
set trunk 1/1 off dot1q
clear trunk 1/2 1-4094
set trunk 1/2 auto dot1q
clear trunk 1/3 1-4094
set trunk 1/3 auto dot1q
clear trunk 1/4 1-4094
set trunk 1/4 auto dot1q
clear trunk 1/5 1-4094
set trunk 1/5 auto dot1q
clear trunk 1/6 1-4094
set trunk 1/6 auto dot1q
clear trunk 1/7 1-4094
set trunk 1/7 auto dot1q
clear trunk 1/8 1-4094
set trunk 1/8 auto dot1q
clear trunk 1/9 1-4094

Those are ethernet ports that I just want to look like the other
modules in the 6509.

#module 2 : 48-port 10/100/1000BaseT Ethernet
set module name 2 CAT5-48-2
set vlan 130 2/1-48

Thanks in advance.

-Jason

Why don't you use the "set port host 2/1-48" command? Also, you can use
"range" in your comands, for example "set trunk 1/1-9 off dot1q"?

Mike
www.ciscoheadsetadapter.com



<rebelangel151@gmail.com> wrote in message
news:1134685265.854999.105570@z14g2000cwz.googlegroups.com...

Call me stupid, but I cannot figure out how to get this removed from my
config:

clear trunk 1/1 1-4094
set trunk 1/1 off dot1q
clear trunk 1/2 1-4094
set trunk 1/2 auto dot1q
clear trunk 1/3 1-4094
set trunk 1/3 auto dot1q
clear trunk 1/4 1-4094
set trunk 1/4 auto dot1q
clear trunk 1/5 1-4094
set trunk 1/5 auto dot1q
clear trunk 1/6 1-4094
set trunk 1/6 auto dot1q
clear trunk 1/7 1-4094
set trunk 1/7 auto dot1q
clear trunk 1/8 1-4094
set trunk 1/8 auto dot1q
clear trunk 1/9 1-4094

Those are ethernet ports that I just want to look like the other
modules in the 6509.

#module 2 : 48-port 10/100/1000BaseT Ethernet
set module name 2 CAT5-48-2
set vlan 130 2/1-48

Thanks in advance.

-Jason

Hi Mike,

I tried the "set port host" command, but I still see the set trunk and
clear trunk stuff in my config... I know I can use a range, but what I
need to know is how to get rid of that stuff and basically put the
module back to a default state.

Thanks for the help.

-Jason

On 15.12.2005 23:35 rebelangel151@gmail.com wrote

Hi Mike,

I tried the "set port host" command, but I still see the set trunk and
clear trunk stuff in my config... I know I can use a range, but what I
need to know is how to get rid of that stuff and basically put the
module back to a default state.

Try something like

set trunk 1/1-48 1-4094

same for dot1q.


Basically you have to find out what the default is and just set the
default. That will make go away additional config statements.

But if it's only for cosmetic I wouldn't care. Why?




Arnold
--
Arnold Nipper, AN45