E1 problem
DComTalk.com Forum Index DComTalk.com
Discussion of VoIP, VPN, Video Conferencen, DSL and other data commucations.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web dcomtalk.com
E1 problem

 
Post new topic   Reply to topic    DComTalk.com Forum Index -> Cisco
Author Message
Guest
Posted: Fri Dec 09, 2005 5:20 pm    Post subject: E1 problem Reply with quote
Hi there,

I have 2821 + E1 WIC + PVDM2-8 Module. Is it enough to configure E1 as
an ISDN PRI?

thanks,

Paul
Back to top
Robert
Guest
Posted: Fri Dec 09, 2005 5:20 pm    Post subject: Re: E1 problem Reply with quote
<fronti27@yahoo.com> wrote in message
news:1134130608.993147.174990@o13g2000cwo.googlegroups.com...
Quote:
Hi there,

I have 2821 + E1 WIC + PVDM2-8 Module. Is it enough to configure E1 as
an ISDN PRI?

I had the same problem


I had 2 solitions
ISP ---------- (RJ45 [could be BNC] presentation) i used Metrodata (DC1000
[RJ45/BNC] and i had Metrodata FM 40000 -------(this is X.35 to V.21
converter) --------- Cisco 2620 and WIC 1T - works perfect


I had Cisco 3640 with 1FE-2CE1-B/U catr - it was enough -------- E1
connection and FaetEthernet card


Your Configutarion should be OK

what type?

G.703(unframed) G7.04
Back to top
Robert
Guest
Posted: Fri Dec 09, 2005 5:20 pm    Post subject: Re: E1 problem Reply with quote
<fronti27@yahoo.com> wrote in message
news:1134130608.993147.174990@o13g2000cwo.googlegroups.com...
Quote:
Hi there,

I have 2821 + E1 WIC + PVDM2-8 Module. Is it enough to configure E1 as
an ISDN PRI?


Current configuration : 920 bytes
!
hostname yourname
!
!
memory-size iomem 40
ip subnet-zero
no ip finger
no ip domain-lookup
!
controller E1 1/0
framing NO-CRC4
channel-group 1 timeslots 1-31
!
!
interface FastEthernet0/0
ip address YO.UR.EX.IP YO.UR.MA.SK (address outside)
speed 10/100/auto
full/half-duplex
!
interface Serial1/0:1
ip address YOUR.IP.AD YO.UR.MA.SK
!
ip classless
ip route 0.0.0.0 0.0.0.0 YO.RO.UT.ER (address inside)
no ip http server
!
end
Back to top
 
Post new topic   Reply to topic    DComTalk.com Forum Index -> Cisco All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




VoIP Solutions: Telephone Systems Electronics Satellite TV Tech & Gadgets
Powered by phpBB