| Author |
Message |
B Thompson
Guest
|
 Posted:
Thu Dec 08, 2005 4:22 pm Post subject:
multi broadcast SSIDs with RADIUS on AP1231 |
|
|
Hi
I would like to broadcast two SSID's on my wireless network but it would
seem that my AP1231G access points do not support this because I am also
doing RADIUS assigned VLAN's. Does anyone know whether it is likely that
this will ever work with future software versions for either the 1230 or
1240 series?
Thanks
Ben |
|
| Back to top |
|
 |
B Thompson
Guest
|
| Posted:
Thu Dec 08, 2005 5:20 pm Post subject:
Re: multi broadcast SSIDs with RADIUS on AP1231 |
|
|
On Thu, 08 Dec 2005 14:53:49 +0100, Uli Link wrote:
| Quote: | relates to your RADIUS assigned VLANs. Give it a try, the broadcast in
beacons does not depend on any authentication nor encryption and
therefor should be VLAN independant.
|
Hi Uli
I have tested this out with 12.3(7)JA2 and sure enough it does not work.
This is also backed up by the documentation :-
http://www.cisco.com/en/US/products/hw/wireless/ps430/
products_configuration_guide_chapter09186a00804e7f4a.html
<snip>
Guidelines for Using Multiple BSSIDs
Keep these guidelines in mind when configuring multiple BSSIDs:
RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs.
</snip>
Cheers
Ben |
|
| Back to top |
|
|
Aaron Leonard
Guest
|
| Posted:
Thu Dec 08, 2005 5:20 pm Post subject:
Re: multi broadcast SSIDs with RADIUS on AP1231 |
|
|
Ben,
I don't believe that we have plans to support RADIUS-assigned VLANs with
MBSSID in "autonomous IOS". This is supported when using WLCs, via the
"Identity Networking" feature.
http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_chapter09186a00805387e1.html#wp1047186
Regards,
Aaron
---
~
~ I would like to broadcast two SSID's on my wireless network but it would
~ seem that my AP1231G access points do not support this because I am also
~ doing RADIUS assigned VLAN's. Does anyone know whether it is likely that
~ this will ever work with future software versions for either the 1230 or
~ 1240 series?
~
~ Thanks
~
~ Ben |
|
| Back to top |
|
|
Uli Link
Guest
|
| Posted:
Thu Dec 08, 2005 5:20 pm Post subject:
Re: multi broadcast SSIDs with RADIUS on AP1231 |
|
|
B Thompson schrieb:
| Quote: | I would like to broadcast two SSID's on my wireless network but it would
seem that my AP1231G access points do not support this because I am also
doing RADIUS assigned VLAN's. Does anyone know whether it is likely that
this will ever work with future software versions for either the 1230 or
1240 series?
|
With 12.3(7)JA MBSSID broadcast is possible. But I don't know, how this
relates to your RADIUS assigned VLANs. Give it a try, the broadcast in
beacons does not depend on any authentication nor encryption and
therefor should be VLAN independant.
If you upgrade to 12.3(7)JA be sure to upgrade to latest rebuild JA2.
This is the first for me, that doesn't crash daily, as long as you don't
issue "sh cdp entry *" on the CLI (which can be avoided without pain).
If your WLAN's availability is critical, I would still recommend known
stable 12.3(2)JA5 or 12.3(4)JA1 and wait a few weeks for (7)JA3/JA4.
--
Uli |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in