DComTalk.com

Oliver Rahn · Guest

Hi,

i try to configure our 836 router.
The A-DSL connection works without problem but with my configuration the
ISDN Backup does not work.
i tried to trigger the backup with shuting down the dialer1 oder atm0
interface but the dialer0 did not dial. Also removing the cable from the
dsl does not help.

Maby someone has a clue?

version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 836router
!
boot-start-marker
boot-end-marker
!
logging console informational
enable secret 5 xxx
!
username user privilege 15 password 0 xxxx
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
ip subnet-zero
!
!
ip dhcp excluded-address 10.0.0.1 10.0.0.59
ip dhcp excluded-address 10.0.0.91 10.0.0.255
!
ip dhcp pool lan
network 10.0.0.0 255.255.255.0
default-router 10.0.0.3
dns-server 10.0.0.1
domain-name lan.de
!
!
no ip domain lookup
ip domain name lan.de
ip ips po max-events 100
no ftp-server write-enable
isdn switch-type basic-net3
!
!
!
!
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
!
!
!
!
!
crypto ipsec client ezvpn RemoteLan
connect manual
group remotelan key xxx
mode network-extension
peer xxx.xxx.xxx.xxx
!
!
!

interface Ethernet0
ip address 10.0.0.3 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache
ip tcp adjust-mss 1452
no cdp enable
crypto ipsec client ezvpn RemoteLan inside
!
interface BRI0
no ip address
encapsulation ppp
no ip route-cache
dialer pool-member 2
isdn switch-type basic-net3
no cdp enable
!
interface ATM0
no ip address
no ip route-cache
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode annexb-ur2
pvc 1/32
pppoe-client dial-pool-number 1
!
!
interface Dialer0
description DIALER PROFILE: INTERNET BACKUP
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 2
dialer idle-timeout 119
dialer string 012345
dialer-group 2
no cdp enable
ppp authentication pap chap callin
ppp chap hostname xxx@online.de
ppp chap password 0 xxx
ppp pap sent-username xxx@online.de password 0 xxx
ppp ipcp dns request
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp chap hostname xxx
ppp chap password 0 xxx
ppp pap sent-username xxx password 0 xxx
ppp ipcp dns request
crypto ipsec client ezvpn RemoteLan
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 Dialer0 150
!
ip http server
ip http secure-server
!
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source list 103 interface Dialer2 overload
!
access-list 23 permit 10.0.0.0 0.0.0.255
access-list 102 permit ip 10.0.0.0 0.0.0.255 any
access-list 103 permit ip 10.0.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
no cdp run
!
!
control-plane
!
!
line con 0
no modem enable
transport preferred all
transport output all
line aux 0
transport preferred all
transport output all
line vty 0 4
exec-timeout 120 0
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
!
!
end

	DComTalk.com Forum Index -> Cisco	All times are GMT
Page 1 of 1