DComTalk.com

Guest · Posted: Mon Nov 28, 2005 5:20 pm Post subject: WIC 1T

We have a new ISP

They provided E1 (G.703) Connection

I am using Metrodata DC1000 and Cisco 1610 with WIC-1T

WAN IP
100.100.100.158/30
remote gtw 100/100/100/157

LAN IP
100.100.93.16/28

my config is (fake IP1s)

IS THIS OK ?

Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname v3
!
ip subnet-zero
no ip routing
!
process-max-time 200

interface Ethernet0/0
ip address 100.100.93.17 255.255.255.240
no ip directed-broadcast
no ip route-cache
!
interface Serial0/0
ip address 100.100.100.158 255.255.255.252
no ip directed-broadcast
no ip route-cache
!
ip classless
ip route 0.0.0.0 0.0.0.0 100.100.100.157
no ip http server
!
line con 0
transport input none
line aux 0
line vty 0 4
password telnet
login
!
no scheduler allocate
end

CiscoHeadsetAdapter.com · Guest

Hi Robert,

If your provider goves you E1, then you need WIC-1E card. I heard that some
external CSU/DSU allow you to connect to either T1 or E1, but 99.9% of cards
are not compatible. T1 is 1.5Mb, when E1 is 2Mb, they use different number
of frames, different synchronization, etc., so they will not work together.
You need to buy WIC-1E card for your router.

Good luck,

Mike
www.ciscoheadsetadapter.com

<robert.szczepanek@gmail.com> wrote in message
news:1133196453.989363.208860@g43g2000cwa.googlegroups.com...

Erik Tamminga · Guest

Hi,

The config below is ok. In contrast to what Mike told you, the WIC-1T is the
right piece of equipment for the job.
An WIC-1E does not exist. The closest to this is a WIC-1ENET wich actually
is a WIC with an Ethernet port.
The WIC-1T is a serial port interface card (capable of max 8mbps). Anytime
you use external CSU/DSU you need a serial T interface.

Erik

"CiscoHeadsetAdapter.com" <for-spam@mail.com> wrote in message
news:6vGdnXGdzbM2CxbeRVn-qg@comcast.com...

	DComTalk.com Forum Index -> Cisco	All times are GMT
Page 1 of 1