Frank Sweetser
Guest
|
 Posted:
Thu Nov 17, 2005 4:41 am Post subject:
Re: Nortel Passport 8010 Chassis Error |
|
|
NRS <jarchibald@networkrs.com> wrote:
| Quote: | I Have a Nortel Passport 8010 Chassis
With one 8690SF module and one 8648TX module Software version 3.0
The above setup works in chassis 1 however in chassis 2 with the same
modules get the follow error on boot up.
crc failed on device 23 calc:d80c dev:ffff
Assertion failed at ch_mac.c<148> getMacAddrPort Chassis mac address must
not be zero
|
There's a small ROM on the chassis itself that determines the base mac address
off of which all of the interface mac addresses are derived. That error
message typically means that that flash has died, and the 8690 can't figure out
what its mac addresses should be. The fix is to RMA the chassis itself.
--
Frank Sweetser fs at wpi.edu | For every problem, there is a solution that
WPI Network Engineer | is simple, elegant, and wrong. - HL Mencken
GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in