| Author |
Message |
Jan Hugo Prins
Guest
|
 Posted:
Thu Oct 27, 2005 4:21 pm Post subject:
Nortel Baystack 425 HW rev 06 port 26. |
|
|
Hi
We have a lot of baystack 425's here on hardware revision 05, they all
function very well. Today I received 3 with hardware revision 06 and they
all had a dis-functioning port 26. I tried the latest firmware revisions
from the nortel site but nothing could help me. Is there anyone here that
has seen the same problem before?
Jan Hugo Prins |
|
| Back to top |
|
 |
PeteG
Guest
|
| Posted:
Sat Oct 29, 2005 11:16 pm Post subject:
Re: Nortel Baystack 425 HW rev 06 port 26. |
|
|
| Quote: |
We have a lot of baystack 425's here on hardware revision 05, they all
function very well. Today I received 3 with hardware revision 06 and they
all had a dis-functioning port 26.
|
Just a thought ( you may have tried this already) but when the switch is
enabled for stacking port 26 is disabled, even if it's not physically
connected to a stack. If you issue a show stacking-mode command from the
CLI interface is it set to standalone or stackable?
Pete |
|
| Back to top |
|
|
Jan Hugo Prins
Guest
|
| Posted:
Wed Nov 02, 2005 11:13 pm Post subject:
Re: Nortel Baystack 425 HW rev 06 port 26. |
|
|
On Sat, 29 Oct 2005 19:16:53 +0100, PeteG wrote:
| Quote: |
We have a lot of baystack 425's here on hardware revision 05, they all
function very well. Today I received 3 with hardware revision 06 and they
all had a dis-functioning port 26.
Just a thought ( you may have tried this already) but when the switch is
enabled for stacking port 26 is disabled, even if it's not physically
connected to a stack. If you issue a show stacking-mode command from the
CLI interface is it set to standalone or stackable?
|
This was indeed the problem. After checking with colleges we found that
teh default setting has changed with Switches that come preinstalled with
Firmware 3.5.
Thanks,
Jan Hugo Prins |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in