IMRAN BHATTI
Guest
|
 Posted:
Tue Oct 18, 2005 8:20 am Post subject:
Configuration of cisco 1760 with E&M connected with VOIP |
|
|
Dear All i am very new to VOIP.
I has given the task to configure cisco 1760-V with 2E&M Cards ( 4
voice Ports) connected with PBX.
Below is my numbering scheme
my office Numering is 759-xxx ( where xxx is the extension number from
PBX)
Is this configuration is ok for recieving calls from other side??
When 757 is dialed from my site call will be forwarded to 172.16.68.9
When 756 is dialed from my site call will be forwarded to 172.16.70.9
and when any call started with number 8 is dialed it will be routed to
192.168.40.20
Please help me in solving this problem
!Configure pots dial-peer 1
dial-peer voice 1 pots
destination-pattern 759...
port 1/0
!Configure pots dial-peer 2
dial-peer voice 2 pots
destination-pattern 759...
Port 1/1
!Configure pots dial-peer 3
dial-peer voice 3 pots
destination-pattern 759...
Port 2/0
!Configure pots dial-peer 4
dial-peer voice 4 pots
destination-pattern 759...
Port 2/1
! Configure voip dial-peer 5
dial-peer voice 5 voip
destination-pattern 757
session target ipv4:172.16.68.9
Configure voip dial-peer 5
dial-peer voice 5 voip
destination-pattern 756
session target ipv4:172.16.70.9
!Configure voip dial-peer 6
dial-peer voice 6 voip
destination-pattern 8T
session target ipv4: 192.168.40.20 |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in