| Author |
Message |
Guest
|
 Posted:
Tue Oct 18, 2005 3:55 am Post subject:
PRI ISDN Inbound channel routing |
|
|
What I'm trying to figure out is: on an ISDN VRU, how does the system
route inbound calls to channels?
Specs:
---
Dialogic D240SC-T1
5ESS 8BZS ESF
---
I have the system configured and am able to make outbound and inbound
calls, however when using the supplied GlobalCall inbound demo app, I
have to map all 23 B-channels as available for inbound in order to be
able to make inbound calls (in the configuration file gcin.cfg). It
seems as though the system *randomly* picks a channel to which to
forward the inbound call, and if the channel is not in WaitCall state,
then it obviously doesn't work.
Since I may want to use some of the channels for outbound and some for
inbound, how can I configure the system to only route inbound calls to
desired channels? |
|
| Back to top |
|
 |
James Carlson
Guest
|
| Posted:
Tue Oct 18, 2005 4:20 pm Post subject:
Re: PRI ISDN Inbound channel routing |
|
|
ekononovich@gmail.com writes:
| Quote: | Since I may want to use some of the channels for outbound and some for
inbound, how can I configure the system to only route inbound calls to
desired channels?
|
You can't. The allocation of channels is controlled by the switch,
not the edge device.
If you really want to reserve some channels as outbound-only, you'll
need to have that configured into the switch.
--
James Carlson, KISS Network <james.d.carlson@sun.com>
Sun Microsystems / 1 Network Drive 71.232W Vox +1 781 442 2084
MS UBUR02-212 / Burlington MA 01803-2757 42.496N Fax +1 781 442 1677 |
|
| Back to top |
|
|
Guest
|
| Posted:
Thu Oct 20, 2005 2:28 am Post subject:
Re: PRI ISDN Inbound channel routing |
|
|
| Thanks! |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in