| Author |
Message |
fabr1z10
Guest
|
 Posted:
Thu Sep 29, 2005 4:21 pm Post subject:
I need some info |
|
|
Hi everybody
I need to know what are the Meridian 1 system options where I can place
the following products:
Tone Detector (Code NT5K48AC)
FALC NMW (Code NT5K96TA)
Superloop Network Card (Code NT8D04BA)
and these phones
M2008 Standard Business Phone (Code NT2K08GA-93)
M2616 Performance Plus Phone (Code NT2K16ZA-93)
Can I place all these parts on the Option11C ?
Elsewhere what are the solutions?
Please help me.
Thanks
Fab |
|
| Back to top |
|
 |
Michael Andrews
Guest
|
| Posted:
Fri Sep 30, 2005 3:28 pm Post subject:
Re: I need some info |
|
|
The phones will definitely work without any problems. I'm not sure
about the cards you listed (or what they're for) so I'd rather not
comment on those.
~ Michael |
|
| Back to top |
|
|
fabr1z10
Guest
|
| Posted:
Fri Sep 30, 2005 4:21 pm Post subject:
Re: I need some info |
|
|
Ok Thanks.
But what are the differencies between the several version of Meridian
1?
(Option 11, Option21, Option51, Option61, Option81).
I have found the SUPERLOOP CARD included in 61/81 Versions.
Where I can find some simple and direct information about this?
Thanks again
Fab |
|
| Back to top |
|
|
3z3k3l
Guest
|
| Posted:
Fri Sep 30, 2005 11:37 pm Post subject:
Re: I need some info |
|
|
Are you looking to put this in a new system?
You can't purchase a new 51C anymore.
You can also check the Nortel Portal http://nortel.pbxinfo.com
You can download info on each system.
fabr1z10 wrote:
| Quote: | Hi everybody
I need to know what are the Meridian 1 system options where I can place
the following products:
Tone Detector (Code NT5K48AC)
FALC NMW (Code NT5K96TA)
Superloop Network Card (Code NT8D04BA)
and these phones
M2008 Standard Business Phone (Code NT2K08GA-93)
M2616 Performance Plus Phone (Code NT2K16ZA-93)
Can I place all these parts on the Option11C ?
Elsewhere what are the solutions?
Please help me.
Thanks
Fab |
|
|
| Back to top |
|
|
Hans Müller
Guest
|
| Posted:
Sat Oct 01, 2005 4:20 pm Post subject:
Re: I need some info |
|
|
"fabr1z10" <f.baldi@ieee.org> schrieb im Newsbeitrag
news:1128001546.003568.215980@z14g2000cwz.googlegroups.com...
| Quote: | Hi everybody
I need to know what are the Meridian 1 system options where I can place
the following products:
Tone Detector (Code NT5K48AC)
FALC NMW (Code NT5K96TA)
Superloop Network Card (Code NT8D04BA)
the NT5K48 (tone detector for analogue sets) and the nt5k96 (analogue line |
card 16 ports) can be placed in a IPE-slot of your 51C. the superloop
network card nt8d04 fits in network slot 0 or 4 of your corenet module |
|
| Back to top |
|
|
Ray
Guest
|
| Posted:
Sat Oct 01, 2005 4:21 pm Post subject:
Re: I need some info |
|
|
fabr1z10 wrote:
| Quote: | Hi everybody
I need to know what are the Meridian 1 system options where I can place
the following products:
Tone Detector (Code NT5K48AC)
FALC NMW (Code NT5K96TA)
Superloop Network Card (Code NT8D04BA)
and these phones
M2008 Standard Business Phone (Code NT2K08GA-93)
M2616 Performance Plus Phone (Code NT2K16ZA-93)
Can I place all these parts on the Option11C ?
Elsewhere what are the solutions?
Please help me.
Thanks
Fab
In Option 11C you can use the Tone Detector and FALC for analogue phones. |
The superloop card is for large systems (ie 51C upwards) only.
The phones will be OK.
Ray |
|
| Back to top |
|
|
XBarNone
Guest
|
| Posted:
Sun Oct 02, 2005 7:23 am Post subject:
Re: I need some info |
|
|
Use the Phones
Sell the rest on Ebay you don't want them unless you own an SL-1, Op 21, or
Op51 switch.
The FALC may even be a 10 port card.
it was for analog phones on old SL-1 and op 21 switches.
The tone detector, also old tech., has been replaced by digitone Receiver
cards or DTR. This resource is built in to the Op11 Core Processor card,
there are 16 of them in 2 banks of 8 on TN 0 (0-7 & 8-15).
This is the resource that turns DTMF tones into data that the switch can
understand.
The Super loop card is still current but only applies to OP 61 and 81
switches. It is sometimes referred to as an extended network card it
supports 4 loops as opposed to the old QPC414 cards that support only 2
loops therefore the next slot position after a superloop card is usually
empty. |
|
| Back to top |
|
|
Hans Müller
Guest
|
| Posted:
Sun Oct 02, 2005 10:58 pm Post subject:
Re: I need some info |
|
|
"XBarNone" <sjfrantz@bellsouth.net> schrieb im Newsbeitrag
news:LuH%e.14317$8l3.61@bignews5.bellsouth.net...
| Quote: | Use the Phones
Sell the rest on Ebay you don't want them unless you own an SL-1, Op 21,
or Op51 switch.
or a 61C, 81C, CS1000M HG SG MG, CS1000E, CS1000S |
| Quote: | The FALC may even be a 10 port card.
it was for analog phones on old SL-1 and op 21 switches.
definitely not, it's not old and it's a 16 port card, there were no 10 port |
cards
| Quote: | The tone detector, also old tech., has been replaced by digitone Receiver
cards or DTR.
|
no again
This resource is built in to the Op11 Core Processor card,
| Quote: | there are 16 of them in 2 banks of 8 on TN 0 (0-7 & 8-15).
This is the resource that turns DTMF tones into data that the switch can
understand.
wouldn't help on the 51C |
|
|
| Back to top |
|
|
XBarNone
Guest
|
| Posted:
Mon Oct 03, 2005 12:23 am Post subject:
Re: I need some info |
|
|
I guess I wasn't very clear since you restate exactly what I was trying to
say.
as for the 10 port card I have to differ. I have worked on a switch with old
10 port cards, although come to think of it I believe they were digital line
cards not analog.
"Hans Müller" <john_m@bluewin.ch> wrote in message
news:43401fcf$1_1@news.bluewin.ch...
| Quote: |
"XBarNone" <sjfrantz@bellsouth.net> schrieb im Newsbeitrag
news:LuH%e.14317$8l3.61@bignews5.bellsouth.net...
Use the Phones
Sell the rest on Ebay you don't want them unless you own an SL-1, Op 21,
or Op51 switch.
or a 61C, 81C, CS1000M HG SG MG, CS1000E, CS1000S
The FALC may even be a 10 port card.
it was for analog phones on old SL-1 and op 21 switches.
definitely not, it's not old and it's a 16 port card, there were no 10
port cards
The tone detector, also old tech., has been replaced by digitone Receiver
cards or DTR.
no again
This resource is built in to the Op11 Core Processor card,
there are 16 of them in 2 banks of 8 on TN 0 (0-7 & 8-15).
This is the resource that turns DTMF tones into data that the switch can
understand.
wouldn't help on the 51C
|
|
|
| Back to top |
|
|
Hans Müller
Guest
|
| Posted:
Mon Oct 03, 2005 1:02 am Post subject:
Re: I need some info |
|
|
"XBarNone" <sjfrantz@bellsouth.net> schrieb im Newsbeitrag
news:LsW%e.547$Gd.74@bignews7.bellsouth.net...
| Quote: | I guess I wasn't very clear since you restate exactly what I was trying to
say.
I can't restate, what you are probably thinking, didn't like that old tech |
stuff
| Quote: | as for the 10 port card I have to differ. I have worked on a switch with
old 10 port cards, although come to think of it I believe they were
digital line cards not analog.
no again, there was no 10port digital line card, but an 8 port (qpc578) |
| Quote: | "Hans Müller" <john_m@bluewin.ch> wrote in message
news:43401fcf$1_1@news.bluewin.ch...
"XBarNone" <sjfrantz@bellsouth.net> schrieb im Newsbeitrag
news:LuH%e.14317$8l3.61@bignews5.bellsouth.net...
Use the Phones
Sell the rest on Ebay you don't want them unless you own an SL-1, Op 21,
or Op51 switch.
or a 61C, 81C, CS1000M HG SG MG, CS1000E, CS1000S
The FALC may even be a 10 port card.
it was for analog phones on old SL-1 and op 21 switches.
definitely not, it's not old and it's a 16 port card, there were no 10
port cards
The tone detector, also old tech., has been replaced by digitone
Receiver cards or DTR.
no again
This resource is built in to the Op11 Core Processor card,
there are 16 of them in 2 banks of 8 on TN 0 (0-7 & 8-15).
This is the resource that turns DTMF tones into data that the switch can
understand.
wouldn't help on the 51C
|
|
|
| Back to top |
|
|
fabr1z10
Guest
|
| Posted:
Wed Oct 05, 2005 1:54 pm Post subject:
Re: I need some info |
|
|
Now I have seen another device, with code NT6G57BA-98, described as
"Operation Post".
Please may I use this device e.g. with 51C? Or what is the Option
required for this specific device?
Thanks again
Fab |
|
| Back to top |
|
|
Hans Müller
Guest
|
| Posted:
Wed Oct 05, 2005 4:08 pm Post subject:
Re: I need some info |
|
|
"fabr1z10" <f.baldi@ieee.org> schrieb im Newsbeitrag
news:1128502441.406869.226580@g14g2000cwa.googlegroups.com...
| Quote: | Now I have seen another device, with code NT6G57BA-98, described as
"Operation Post".
Please may I use this device e.g. with 51C? Or what is the Option
required for this specific device?
seems to be the code for a CIU (Console Interface Unit). It's an interface |
unit between two digital ports and a PC with a PC-Console SW installed. No
problem to use with an 51C |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in