Geir Holmavatn
Guest
|
 Posted:
Fri Sep 16, 2005 9:22 pm Post subject:
Linksys SRW224 and trunking..? |
|
|
Hi,
We have two separate LANs (LAN1 and LAN2) which should have NO communication
between each other. They are connected to the internet via a firewall with
two VLAN ports.
I need to access both of these LANs from a separate computer. Unfortunately
our fiurewall does not have 3 VLAN ports so I cannot achieve this through
it.
However on LAN1 we have a Linksys SRW224 managed switch with a few spare
ports. Say I connect LAN2 to port 23 and to port 24 I connect the computer
needing to access both LAN1 and LAN2. Is it possible to configure this
switch to achieve this?
Summary, Linksys SRW224
Port 1..22 normal switch operation for LAN1 and connection to port 24.
Port 23: Connected to LAN2 completely waterproof to/from LAN1 (port 1..22)
but connection to port 24.
If this is possible with this device, how would I configure it using the
webview utility?
Thanks a bunch if somebody have comments and info
greetings
Geir |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in