| Author |
Message |
Stephan Brammen-Hüpen
Guest
|
 Posted:
Mon Jul 12, 2004 12:12 pm Post subject:
Zyxel 630 HW |
|
|
Hi everyone,
I hope this is the right group to answer. I have a Zyxel 630 HW with a fixed
IP-Adress and I want to have a VPN-Connection to a certain server behind
that device. I can't get it working.
What I already did is setting the Firewall-Ports "Internet to LAN" to Any
TCP and Any UDP and vice versa "LAN to Internet" to ANy TCP and Any UDP and
I still can't reach neither the router nor the server.
What did I do wrong??
What can I do to get it working? I can't change the Hardware because it is
provided third-party.
Thanx for a solution. |
|
| Back to top |
|
 |
phoenix
Guest
|
| Posted:
Mon Jul 12, 2004 6:55 pm Post subject:
Re: Zyxel 630 HW |
|
|
On Mon, 12 Jul 2004 10:12:54 +0200, Stephan Brammen-Hüpen wrote:
| Quote: | Hi everyone,
I hope this is the right group to answer. I have a Zyxel 630 HW with a fixed
IP-Adress and I want to have a VPN-Connection to a certain server behind
that device. I can't get it working.
What I already did is setting the Firewall-Ports "Internet to LAN" to Any
TCP and Any UDP and vice versa "LAN to Internet" to ANy TCP and Any UDP and
I still can't reach neither the router nor the server.
What did I do wrong??
What can I do to get it working? I can't change the Hardware because it is
provided third-party.
Thanx for a solution.
|
Have you forwarded the correct ports to the PC you want to conenct to? Have
a look here http://snipurl.com/7p0p for some details.
Regards
Bill |
|
| Back to top |
|
|
Stephan Brammen-Hüpen
Guest
|
| Posted:
Tue Jul 13, 2004 10:04 am Post subject:
Re: Zyxel 630 HW |
|
|
"phoenix" <phoenix@fakeaddress.invalid> wrote
| Quote: |
On Mon, 12 Jul 2004 10:12:54 +0200, Stephan Brammen-Hüpen wrote:
Hi everyone,
I hope this is the right group to answer. I have a Zyxel 630 HW with a
fixed
IP-Adress and I want to have a VPN-Connection to a certain server behind
that device. I can't get it working.
What I already did is setting the Firewall-Ports "Internet to LAN" to
Any
TCP and Any UDP and vice versa "LAN to Internet" to ANy TCP and Any UDP
and
I still can't reach neither the router nor the server.
What did I do wrong??
What can I do to get it working? I can't change the Hardware because it
is
provided third-party.
Thanx for a solution.
Have you forwarded the correct ports to the PC you want to conenct to?
Have
a look here http://snipurl.com/7p0p for some details.
Regards
Bill
|
I opened all the ports listed as required on the router...including 1723 and
the ports for RDP and Citrix-Traffic. When I try to connect - I get a "did
not respond" error. If I switch the machine to a local DMZ by setting the
forwarded ports list to Any TCP and Any UDP I still can't connect. I can't
seem to find the right item in the forwarding configuration. Can anyone
help? |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in