Guest
|
 Posted:
Mon Aug 08, 2005 8:20 am Post subject:
Extreme Networks Spanning Tree Protocol (STP) |
|
|
G'day all,
I hope I'm posting in the right newsgroup. I have a several Extreme
Networks switchs running STP (as we have multiple paths between them.
The "Number of Topology Changes" continue to change altough the uplinks
between the switchs never change state. Is this normal and should I
expect to see an increment of the toplogy change counter if a
workstation on an STP enabled port changes state (up to down or down to
up)? All the workstation ports are configured with "configure stpd s0
port link-type auto".
* sw-extremenetworks-1:1 # sh stpd s0
Stpd: s0 Stp: ENABLED Number of Ports: 50
Rapid Root Failover: Enabled
Operational Mode: 802.1W
802.1Q Tag: (none)
Ports: 1,2,3,4,5,6,7,8,9,10,11,12
13,14,15,16,17,18,19,20,21,22,23,24
25,26,27,28,29,30,31,32,33,34,35,36
37,38,39,40,41,42,43,44,45,46,47,48
49,50
Active Vlans: biglan
Bridge Priority: 32768
BridgeID: 80:00:00:01:30:bb:05:80
Designated root: 20:00:00:01:30:18:50:a0
RootPathCost: 4 Root Port: 49
MaxAge: 20s HelloTime: 2s ForwardDelay: 15s
CfgBrMaxAge: 20s CfgBrHelloTime: 2s CfgBrForwardDelay: 15s
Topology Change Time: 35s Hold time: 1s
Topology Change Detected: FALSE Topology Change: FALSE
Number of Topology Changes: 586
Time Since Last Topology Change: 25s
Regards,
Scott. |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in