Network switch crashes when at least 3 computers connected
DComTalk.com Forum Index DComTalk.com
Discussion of VoIP, VPN, Video Conferencen, DSL and other data commucations.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web dcomtalk.com
Network switch crashes when at least 3 computers connected

 
Post new topic   Reply to topic    DComTalk.com Forum Index -> Ethernet
Author Message
Phil Carter
Guest





Posted: Sat Jul 30, 2005 12:20 am    Post subject: Network switch crashes when at least 3 computers connected Reply with quote

I have an auto-negotiation 10/100 Mbps switch (Addtron ADS-1008i) and
four computers with 100 Mbps network cards. When I have at least three
computers connected to the network, the switch eventually crashes. It
usually takes between 5 minutes to a few hours. The lights on the
switch showing that computers are connected turn off, and then start
blinking on briefly for a while, and then they turn off entirely. The
switch sometimes starts working again if I unplug some of the network
cables, and it always starts working if I unplug the switch and plug it
back in. It doesn't matter which three computers are connected, or
whether any of them are using the network. I have no internet
connection on the switch - only the four computers. All of the
computers run Slackware Linux. Any ideas on how I can fix this?
Back to top
Patrick Schaaf
Guest





Posted: Sat Jul 30, 2005 12:20 am    Post subject: Re: Network switch crashes when at least 3 computers connect Reply with quote

"Phil Carter" <philip_c_carter@yahoo.com> writes:

[SNIP]
Quote:
Any ideas on how I can fix this?

Buy a new switch.

best regards
Patrick
Back to top
J. Clarke
Guest





Posted: Sat Jul 30, 2005 8:42 pm    Post subject: Re: Network switch crashes when at least 3 computers connect Reply with quote

Phil Carter wrote:

Quote:
I have an auto-negotiation 10/100 Mbps switch (Addtron ADS-1008i) and
four computers with 100 Mbps network cards. When I have at least three
computers connected to the network, the switch eventually crashes. It
usually takes between 5 minutes to a few hours. The lights on the
switch showing that computers are connected turn off, and then start
blinking on briefly for a while, and then they turn off entirely. The
switch sometimes starts working again if I unplug some of the network
cables, and it always starts working if I unplug the switch and plug it
back in. It doesn't matter which three computers are connected, or
whether any of them are using the network. I have no internet
connection on the switch - only the four computers. All of the
computers run Slackware Linux. Any ideas on how I can fix this?

If it has sentimental value call Addtron and see how much they'll charge to
fix it. Otherwise just toss it and get a new one.

--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
Back to top
 
Post new topic   Reply to topic    DComTalk.com Forum Index -> Ethernet All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




VoIP Solutions: Telephone Systems Electronics Satellite TV Tech & Gadgets
Powered by phpBB