Gordo
Guest
|
 Posted:
Sun Jul 24, 2005 4:20 pm Post subject:
Re: setting up wireless network with dsl |
|
|
suem wrote:
| Quote: | -------------------------------------
I have verizon dsl (westell 2200 modem) I bought a linksys wireless g
router. tried to set up network have pc wired and 2 wireless laptops.
I can access my chat but not internet. I have modem set as bridge as
required and router is pppoe. HELP any ideas??
##-----------------------------------------------##
Article posted with Cabling-Design.com Newsgroup Archive
http://www.cabling-design.com/forums
no-spam read and post WWW interface to your favorite newsgroup -
comp.dcom.xdsl - 2389 messages and counting!
##-----------------------------------------------##
|
Here is the procedure I use.
To set up Westell 2200 modem and Linksys G router WRT54G-V2:
1. Connect modem to computer without router.
2. Reset modem (press reset button for 30 sec.), and wait for stable lights.
3. Boot-up computer.
4. Go through account setup using Verizon CD.
5. Verify Internet access.
6. Connect to modem 192.168.1.1, and change to bridge mode:
a. config/VC/PPPoE/edit/PPPoE_Protocol=Bridge (vice PPPoE)
b. config/DHCP/off (vice Private_Lan)
7. Turn off computer.
8. Connect computer to router and modem.
9. Reset router (press reset button for 30 sec.), and wait for stable
lights.
10. Power-cycle router and modem.
11. Boot-up computer.
12. Connect to router 192.168.1.1, switch to PPPoE, and enter Verizon
username/PW; host=blank; domain=blank; then wireless/SSID=xxxxxxx
13. Verify status as connected.
It is also a good idea to update the router firmware. |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in