Aaron Leonard
Guest
|
 Posted:
Fri Dec 17, 2004 12:22 am Post subject:
Re: Channel-Group Groups |
|
|
On 16 Dec 2004 10:53:42 -0800, amyl@paxemail.com wrote:
~ When configuring a T1 and setting up the timeslots you have an option
~ to set the channel group group number. What exactly does the
~ "channel-group" group number do? Normally, I plug in 1, but you can
~ set it from 0-23.
~
~ channel-group ?? timeslots 1-24 speed 64
~ (?? is where the group number would go.)
~
~ Thanks
~ Amy.
The channel-group number becomes part of the name of the serial interface
you create. For example, if you do this:
controller T1 2
channel-group 3 timeslots 1-24 speed 64
then this creates an interface called "Serial 2:3"
You can configure multiple channel-groups (and/or ds0-groups
if your platform supports it), so pick a unique channel-group/
ds0-group ID for each such group ... e.g.
controller t1 2
channel-group 0 timeslots 1-4 speed 64
channel-group 1 timestots 5-12 speed 64
ds0-group 2 timeslots 13-24 type e&m-fgb
Aaron |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in