Walter Roberson
Guest
|
 Posted:
Mon Apr 18, 2005 10:32 pm Post subject:
Re: Linsys Router Behind T1 |
|
|
[I'm just injecting this into the more appropriate Cisco newsgroup.
Note that I set followups to the Cisco newsgroup.]
In article <1113843977.032372.243120@f14g2000cwb.googlegroups.com>,
<cintreon@universaltelecom.com> wrote:
| Quote: | I want to setup a VPN at my office so I purchased a BEFVP41 Linksys VPN
Router. The connection at the office is a T1 behind a Cisco router.
If I want to connect this router to the LAN, how would I go about
configuring it? My default gateway on the lan is 10.1.1.1 (Cisco
router). Do I set this up in router mode or gateway mode?
My guess would be to set it up in router mode and give it a lan ip of
10.1.2.1 and a wan ip of 10.1.1.50 with a subnet of 255.255.255.0 and
default gateway of 10.1.1.1. I have this configuration and I cannot
ping 10.1.1.50 from my lan and I cannot ping 10.1.1.1 from a machine
connected to the VPN router. I am clueless when it comes to this. Any
help is appreciated
|
--
Would you buy a used bit from this man?? |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in