| Author |
Message |
Steve Smith
Guest
|
 Posted:
Sun Apr 03, 2005 7:01 am Post subject:
Switch Killed Computer's LAN port |
|
|
I connected a Asound 8 port switching hub to my network and one of the
computers suddenly could no longer communicate over the LAN. It couldn't get
an IP address. I verified that this is not a software problem by swapping
the hard drive and OS from an identical computer. I installed another LAN
cards in this computer and it now work fine with the same cable, etc. The
problem port is an on-board port on a Biostar M7NCG motherboard. I've reset
the CMOS, but that didn't help. The problem port's lights come one when the
cable is plugged in, but it will not acquire an IP address. It also will not
communicate when I set a static IP address. The NIC appears fine in Device
Manager. The port has been working fine for the last three months right up
until I installed the switching hub. It appears the switch caused the
problem. However, other computers connected to the switch were not affected
and the switch appears to be working fine. I've installed a LAN card in the
problem computer and all is well, but this has me wondering.
What could cause this problem? Is it possible that the switch is defective
and it sent out an electrical current that damaged the port? I'm concerned
that the switch could cause more problems. Is there a way to test a switch's
LAN port to check its electrical characteristics?
Thank you,
Steve Smith |
|
| Back to top |
|
 |
James Knott
Guest
|
| Posted:
Sun Apr 03, 2005 4:03 pm Post subject:
Re: Switch Killed Computer's LAN port |
|
|
Steve Smith wrote:
| Quote: | What could cause this problem? Is it possible that the switch is defective
and it sent out an electrical current that damaged the port? I'm concerned
that the switch could cause more problems. Is there a way to test a
switch's LAN port to check its electrical characteristics?
|
Two quick tests.
Does that computer work in other switch ports?
Does that port work with other computers?
It's unlikely that any device damaged another. The voltage required to do
that, simple does not exist on the NICs and they're also connected to the
line via transformers, so there's no direct connection, between devices. |
|
| Back to top |
|
|
Steve Smith
Guest
|
| Posted:
Sun Apr 03, 2005 4:32 pm Post subject:
Re: Switch Killed Computer's LAN port |
|
|
James Knott wrote:
| Quote: | Two quick tests.
Does that computer work in other switch ports?
Does that port work with other computers?...
|
No, the computer's problem port does not work in other switch ports or when
connected directly to the router.
Other computers and other LAN cards in this computer work just fine on the
same cable and switch port.
The problem is definately with the computer's onboard LAN port. Perhaps it
was just a coincidence that the port died when I connected it to the new
switch. Any other ideas?
Thanks,
Steve Smith |
|
| Back to top |
|
|
James Knott
Guest
|
| Posted:
Sun Apr 03, 2005 4:55 pm Post subject:
Re: Switch Killed Computer's LAN port |
|
|
Steve Smith wrote:
| Quote: | The problem is definately with the computer's onboard LAN port. Perhaps it
was just a coincidence that the port died when I connected it to the new
switch. Any other ideas?
|
What do the lights on the NIC show? What does the operating system show for
status? |
|
| Back to top |
|
|
Al Dykes
Guest
|
| Posted:
Sun Apr 03, 2005 4:59 pm Post subject:
Re: Switch Killed Computer's LAN port |
|
|
In article <jnR3e.13689$%d7.5591@lakeread03>,
Steve Smith <s.w.smithREMOVECAPS@ctliving.net> wrote:
| Quote: | James Knott wrote:
Two quick tests.
Does that computer work in other switch ports?
Does that port work with other computers?...
No, the computer's problem port does not work in other switch ports or when
connected directly to the router.
Other computers and other LAN cards in this computer work just fine on the
same cable and switch port.
The problem is definately with the computer's onboard LAN port. Perhaps it
was just a coincidence that the port died when I connected it to the new
switch. Any other ideas?
Thanks,
Steve Smith
|
sh*t happens. It's possible that the pins on the RJ45 socket have
been damaged. IMO you can't blame it on the switch.
I assume you've tried a known-good cable, etc.
--
a d y k e s @ p a n i x . c o m
Don't blame me. I voted for Gore. |
|
| Back to top |
|
|
Steve Smith
Guest
|
| Posted:
Mon Apr 04, 2005 3:24 am Post subject:
Re: Switch Killed Computer's LAN port |
|
|
James Knott wrote:
| Quote: | What do the lights on the NIC show? What does the operating system show
for
status?
|
The lights on the NIC light up just as they did before the problem. Also,
another identical computer has the same lights. Windows XP Pro shows that
the NIC device is operating correctly, but it also shows that it has limited
or no connectivity. I'm using the same cable with another NIC and that NIC
and cable work fine in this computer. I guess Al Dykes is right, "sh*t
happens".
Steve Smith |
|
| Back to top |
|
|
Randy Howard
Guest
|
| Posted:
Fri Apr 08, 2005 3:40 am Post subject:
Re: Switch Killed Computer's LAN port |
|
|
In article <YY6dnX6TLYA-RtLfRVn-sw@rogers.com>,
james.knott@rogers.com says...
| Quote: | Steve Smith wrote:
What could cause this problem? Is it possible that the switch is defective
and it sent out an electrical current that damaged the port? I'm concerned
that the switch could cause more problems. Is there a way to test a
switch's LAN port to check its electrical characteristics?
Two quick tests.
Does that computer work in other switch ports?
Does that port work with other computers?
It's unlikely that any device damaged another. The voltage required to do
that, simple does not exist on the NICs and they're also connected to the
line via transformers, so there's no direct connection, between devices.
|
I had a lightning strike about a year ago, hopped on the network, and
over half the ports on a 24+2 switch got zapped. In many cases, the
downstream NICs got zapped as well. In a couple cases the NIC got
zapped, but the port on the switch was still ok, and vice versa. So,
it's possible, but perhaps much less so under normal circumstances.
:-)
--
Randy Howard (2reply remove FOOBAR)
"Making it hard to do stupid things often makes it hard
to do smart ones too." -- Andrew Koenig |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in