| Author |
Message |
Thomas
Guest
|
 Posted:
Sat Nov 13, 2004 12:20 am Post subject:
1000-base-SX link does not work from Accelar1150 to BayStack |
|
|
I've got the following connected via a fibre patch cable (62.5/125um):
Accelar 1150, Software Release: 2.0.5.5
BayStack 470-48T: HW:#05 FW:3.0.0.5 SW:v3.0.3.08 ISVN:2
The link light sometimes comes on, sometimes not on the 470. There are
only TX/RX lights on the Accelar, so I cannot tell the link status
there (other than the light goes from amber to off when I connect the
fibre). The Activity light flicks on the 470 once in a while, but it
is probably just the switch sending broadcasts (there should be tonnes
of other broadcast traffic from the rest of the network that I should
get). The TX/RX lights on the Accelar do not come on at all.
The Accelar is connected to the following, and the 1000-base-sx
connection works properly with it.
BayStack 450-24T: HW:RevL FW:V1.36 SW:v3.1.1 ISVN:1
Does anyone have any idea why I cannot get traffic to cross over the
gigabit connections on the 470?
Thanks,
Thomas
thomas.samoht@gmail.com |
|
| Back to top |
|
 |
Brat
Guest
|
| Posted:
Sun Nov 14, 2004 3:28 am Post subject:
Re: 1000-base-SX link does not work from Accelar1150 to BayS |
|
|
Hi tomas,
Try to disable autonegotiation on Accelar side, it works for me.
Brat
| Quote: | I've got the following connected via a fibre patch cable (62.5/125um):
Accelar 1150, Software Release: 2.0.5.5
BayStack 470-48T: HW:#05 FW:3.0.0.5 SW:v3.0.3.08 ISVN:2
The link light sometimes comes on, sometimes not on the 470. There are
only TX/RX lights on the Accelar, so I cannot tell the link status
there (other than the light goes from amber to off when I connect the
fibre). The Activity light flicks on the 470 once in a while, but it
is probably just the switch sending broadcasts (there should be tonnes
of other broadcast traffic from the rest of the network that I should
get). The TX/RX lights on the Accelar do not come on at all.
The Accelar is connected to the following, and the 1000-base-sx
connection works properly with it.
BayStack 450-24T: HW:RevL FW:V1.36 SW:v3.1.1 ISVN:1
Does anyone have any idea why I cannot get traffic to cross over the
gigabit connections on the 470?
Thanks,
Thomas
thomas.samoht@gmail.com |
|
|
| Back to top |
|
|
Thomas
Guest
|
| Posted:
Mon Nov 15, 2004 4:51 am Post subject:
Re: 1000-base-SX link does not work from Accelar1150 to BayS |
|
|
Thanks for the tip... I'll try that on Monday.
What firmware versions are you using in the Accelar?
Thomas
"Brat" <pawel@rckik.krakow.pl> wrote in message news:<cn61bb$qlo$1@srv.cyf-kr.edu.pl>...
| Quote: | Hi tomas,
Try to disable autonegotiation on Accelar side, it works for me.
Brat
I've got the following connected via a fibre patch cable (62.5/125um):
Accelar 1150, Software Release: 2.0.5.5
BayStack 470-48T: HW:#05 FW:3.0.0.5 SW:v3.0.3.08 ISVN:2
The link light sometimes comes on, sometimes not on the 470. There are
only TX/RX lights on the Accelar, so I cannot tell the link status
there (other than the light goes from amber to off when I connect the
fibre). The Activity light flicks on the 470 once in a while, but it
is probably just the switch sending broadcasts (there should be tonnes
of other broadcast traffic from the rest of the network that I should
get). The TX/RX lights on the Accelar do not come on at all.
The Accelar is connected to the following, and the 1000-base-sx
connection works properly with it.
BayStack 450-24T: HW:RevL FW:V1.36 SW:v3.1.1 ISVN:1
Does anyone have any idea why I cannot get traffic to cross over the
gigabit connections on the 470?
Thanks,
Thomas
thomas.samoht@gmail.com |
|
|
| Back to top |
|
|
Guest
|
| Posted:
Tue Nov 16, 2004 12:15 am Post subject:
Re: 1000-base-SX link does not work from Accelar1150 to BayS |
|
|
Disabling the autonegotiation on the Accelar fixed the problem.
Thanks,
Thomas
Brat wrote:
| Quote: | Hi tomas,
Try to disable autonegotiation on Accelar side, it works for me.
Brat
I've got the following connected via a fibre patch cable
(62.5/125um):
Accelar 1150, Software Release: 2.0.5.5
BayStack 470-48T: HW:#05 FW:3.0.0.5 SW:v3.0.3.08 ISVN:2
The link light sometimes comes on, sometimes not on the 470. There
are
only TX/RX lights on the Accelar, so I cannot tell the link status
there (other than the light goes from amber to off when I connect
the
fibre). The Activity light flicks on the 470 once in a while, but
it
is probably just the switch sending broadcasts (there should be
tonnes
of other broadcast traffic from the rest of the network that I
should
get). The TX/RX lights on the Accelar do not come on at all.
The Accelar is connected to the following, and the 1000-base-sx
connection works properly with it.
BayStack 450-24T: HW:RevL FW:V1.36 SW:v3.1.1 ISVN:1
Does anyone have any idea why I cannot get traffic to cross over
the
gigabit connections on the 470?
Thanks,
Thomas
thomas.samoht@gmail.com |
|
|
| Back to top |
|
|
Brat
Guest
|
| Posted:
Wed Nov 17, 2004 4:50 am Post subject:
Re: 1000-base-SX link does not work from Accelar1150 to BayS |
|
|
Uzytkownik "Thomas" <thomas.samoht@gmail.com> napisal w wiadomosci
news:5c90f217.0411141551.34e781f7@posting.google.com...
| Quote: | Thanks for the tip... I'll try that on Monday.
What firmware versions are you using in the Accelar?
Thomas
|
Well, I don't remember - but we have 2.x release
Brat |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in