Rowdy
Guest
|
 Posted:
Tue Nov 02, 2004 7:21 pm Post subject:
Option 11 mirroring digital extention to analog port |
|
|
It has been about six years since I have been programming on the old
Nortel stuff. I am back into a real job now and restarting
familiarity. The site here has an Option11 hanging on the wall with two
cabinrts. One PRI appears to be the only connectivity with some trunk
cards available for some killed-off purpose.
PROJECT:
I want to experiment with some analog VOIP boxes for remote working.
QUESTION:
What are some ideas/methods for using an analog port in conjunction with
a digital set?
MY THOUGHTS:
1. Could I just COPY the digital extention as the analog port DN so
it would ring at the same time for incoming? If I were on the
analog set then, what would happen to incoming calls? Which
profile would dictate fwd to vmail?
2. I could put both extention DN's in a ring-all group??? Dont
recall how to do this...
3. I could put a FWD button on my set to send calls to the analog
port when Im not in the office...
4. I could hunt to the digital set 4 times, then the analog set 4
times and then voicemail..?
Your ideas would be appreciated.
--
..........................................................
NOTE: I have modified my reply-to address to avoid
Unsolicited Commercial Email. To respond to me directly,
please remove the dotUCE in the reply-to address.
.......................................................... |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in